Disclosure: when you buy through links on our site, we may earn an affiliate commission.

VFD Basics with Real Applications Supported by PLC & HMI

Learn AC Drive (VFD) Basics with Real Hardware (Supported By PLC & HMI & Modbus and Softwares)
(12 reviews)
150 students
Created by


CourseMarks Score®







Platform: Udemy
Video: 10h 25m
Language: English
Next start: On Demand

Top VFD courses:

Detailed Analysis

CourseMarks Score®

9.1 / 10

CourseMarks Score® helps students to find the best classes. We aggregate 18 factors, including freshness, student feedback and content diversity.

Freshness Score

9.7 / 10
This course was last updated on 9/2021.

Course content can become outdated quite quickly. After analysing 71,530 courses, we found that the highest rated courses are updated every year. If a course has not been updated for more than 2 years, you should carefully evaluate the course before enrolling.

Student Feedback

7.5 / 10
We analyzed factors such as the rating (4.0/5) and the ratio between the number of reviews and the number of students, which is a great signal of student commitment.

New courses are hard to evaluate because there are no or just a few student ratings, but Student Feedback Score helps you find great courses even with fewer reviews.

Content Score

9.5 / 10
Video Score: 9.2 / 10
The course includes 10h 25m video content. Courses with more videos usually have a higher average rating. We have found that the sweet spot is 16 hours of video, which is long enough to teach a topic comprehensively, but not overwhelming. Courses over 16 hours of video gets the maximum score.
The average video length is 12 hours 53 minutes of 5 VFD courses on Udemy.
Detail Score: 9.9 / 10

The top online course contains a detailed description of the course, what you will learn and also a detailed description about the instructor.

Extra Content Score: 9.5 / 10

Tests, exercises, articles and other resources help students to better understand and deepen their understanding of the topic.

This course contains:

2 articles.
0 resource.
0 exercise.
0 test.

Table of contents


Dear Students,
We prepared applications for you by using delta vfd , schneider vfd , lenze vfd with real hardware.
You will see how we can control a 3 phase motor.
You will see how the parameters of vfds affect the motor.
We read all the values ​​of the vfd over Modbus communication and wrote the values ​​to the vfd.
We run the vfd with the keypad on it.
We run the vfd with the buttons on it.
We run the vfd frequency with digital potentiometer or up and down keys.
At the same time, we checked the vfd with the external terminals.
We wrote a frequency value to the vfd with an external potentiometer.
We controlled the vfd with serial communication over PLC and wrote all frequency values ​​over communication.
At the same time, we gave the forward-reverse and stop-run commands of the vfd over communication.

We have programmed the terminals on the vfd and made applications for you to do almost any application.
We did PID control with the vfd.
We applied different voltages to the vfd and the motor, applied dc brakes and monitored all results.
With the Dopsoft program, we made control the vfd via hmi.
While learning dopsoft on the one hand, we showed all the values ​​of the vfd on the screen with dopsoft on the other hand.
And we wrote to the vfd from the HMI .

We learned about plc programming by making small applications with basic plc programming training.

With the VFDSoft program, we connected to the vfd and checked the vfd on the computer.
We backed up the vfd parameters and uploaded the backed-up parameters to the vfd.
We watched and recorded the vfd’s information with the trend.
We have seen how we can easily change the parameters of the vfd with vfdsoft.

With schneider VFD sections, you can learn that complete parameter structure of Schneider vfds.
Also , in Lenze VFD section , you can learn that basics of Lenze 8200 vector vfd and also how to control it via pc or via terminals.

Shortly , what you will learn
– Delta AC Vfds
– Delta VFD Parameters and Applications
– Schneider ATV Vfds
– Schneider ATV12 VFD Applications
– Schneider ATV12 VFD Control Methods
– VFDSoft
– ISPSoft
– Basics of Plc Programming
– AS200 Series Plc
– DOPSoft
– DOP 100 HMI Basics
– Complete Modbus (RS-485) Communication
– PID Control
– Motor Control for Different Conditions and Applications
– Lenze 8200 Vector VFD
– Global Drive Control (GDC) Software
And much more than these.
You can learn deeply how to control vfds with different brand vfds.

If you stuck at any point that you can ask a question directly to us.

You will learn

✓ Delta AC Drives
✓ Modbus Communication
✓ HMI Programming
✓ DOPSoft
✓ ISPSoft
✓ Plc Programming Basics
✓ Motor Control Basics
✓ AS200 Series Plc Basics
✓ Technical Informations About Industrial Automation
✓ Applications and Realities
✓ VFD Basics
✓ PID Control of VFD
✓ VFDSoft
✓ Schneider ATV12 VFD
✓ Schneider VFD Control Methods
✓ Schneider VFD Basics
✓ Lenze VFD
✓ Lenze 8200 Vector
✓ GDC (Global Drive Control)


• You need to be willing to learn and be patience .You need to keep following instructions and applications carefully

This course is for

• Anyone wanting full control of delta vfds
• Anyone who wants to do modbus communication with Delta vfds
• Anyone who wants to use delta vfds in all kinds of applications
• Anyone who wants to improve plc programs and applications

How much does the VFD Basics with Real Applications Supported by PLC & HMI course cost? Is it worth it?

The course costs $14.99. And currently there is a 80% discount on the original price of the course, which was $74.99. So you save $60 if you enroll the course now.
The average price is $17.8 of 5 VFD courses on Udemy.

Does the VFD Basics with Real Applications Supported by PLC & HMI course have a money back guarantee or refund policy?

YES, VFD Basics with Real Applications Supported by PLC & HMI has a 30-day money back guarantee. The 30-day refund policy is designed to allow students to study without risk.

Are there any SCHOLARSHIPS for this course?

Currently we could not find a scholarship for the VFD Basics with Real Applications Supported by PLC & HMI course, but there is a $60 discount from the original price ($74.99). So the current price is just $14.99.

Who is the instructor? Is Derstagram Akademi a SCAM or a TRUSTED instructor?

Derstagram Akademi has created 11 courses that got 380 reviews which are generally positive. Derstagram Akademi has taught 6,499 students and received a 4.0 average review out of 380 reviews. Depending on the information available, Derstagram Akademi is a TRUSTED instructor.
Automation & Software Engineer
Derstagram Akademi created by Mustafa AYDIN who automation & software  engineer.

As Derstagram Akademi , we are eager to learn and teachs electronics & industrial automation and plcs.

As Derstagram Akademi , you can see all brands that we are working with it ;

Siemens , Omron , Lenze ,Delta , GMT ,Fultek , Schneider , CodeSys

Also via Derstagram Akademi webpage , you can reach free articles, tutorials , e-books , downloadable materials and a little bit more files.

Also we published TRIAC android app on Google Play and you can see very good and useful informations about plcs & electronics and automation informations in this app.

For any question , feedback or advise  , you can directly contact with us.

We are open to advise and critiques.



Show more


CourseMarks Score®







Platform: Udemy
Video: 10h 25m
Language: English
Next start: On Demand

Students are also interested in

Review widget (for course creators):

VFD Basics with Real Applications Supported by PLC & HMI
Code for the widget (just copy and paste it to your site):
<a href="https://coursemarks.com/course/vfd-real-applications-with-plc-modbus-hmi-softwares/" target="_blank" title=" VFD Basics with Real Applications Supported by PLC & HMI on Coursemarks.com"><img border="0" src="https://coursemarks.com/widget/91.svg" width="200px" alt=" VFD Basics with Real Applications Supported by PLC & HMI rating"/></a>