Disclosure: when you buy through links on our site, we may earn an affiliate commission.

Complete Electronics Hardware Design Course 2021

Complex Mixed Signal Board Design Course (Ethernet PHY, STM32F407, STM32F103, CH340C, DAC/MIC, 24Bit ADC, 36W Drivers)
4.5
4.5/5
(67 reviews)
476 students
Created by Aviral Mishra

9.6

CourseMarks Score®

9.8

Freshness

8.8

Feedback

9.7

Content

Platform: Udemy
Price: $11.99
Video: 22h 56m
Language: English
Next start: On Demand

Top Electronics courses:

Detailed Analysis

CourseMarks Score®

9.6 / 10

CourseMarks Score® helps students to find the best classes. We aggregate 18 factors, including freshness, student feedback and content diversity.

Freshness Score

9.8 / 10
This course was last updated on 2/2021.

Course content can become outdated quite quickly. After analysing 71,530 courses, we found that the highest rated courses are updated every year. If a course has not been updated for more than 2 years, you should carefully evaluate the course before enrolling.

Student Feedback

8.8 / 10
We analyzed factors such as the rating (4.5/5) and the ratio between the number of reviews and the number of students, which is a great signal of student commitment.

New courses are hard to evaluate because there are no or just a few student ratings, but Student Feedback Score helps you find great courses even with fewer reviews.

Content Score

9.7 / 10
Video Score: 10.0 / 10
The course includes 22h 56m video content. Courses with more videos usually have a higher average rating. We have found that the sweet spot is 16 hours of video, which is long enough to teach a topic comprehensively, but not overwhelming. Courses over 16 hours of video gets the maximum score.
Detail Score: 9.5 / 10

The top online course contains a detailed description of the course, what you will learn and also a detailed description about the instructor.

Extra Content Score: 9.5 / 10

Tests, exercises, articles and other resources help students to better understand and deepen their understanding of the topic.

This course contains:

0 article.
11 resources.
0 exercise.
0 test.

Table of contents

Description

I have Divided this course into 4 Major Sections:
•1st Section is Selection of Each Components whatever Going inside the Schematic.
•2nd Section is Schematic Designing by Reading Datasheets.
•3rd Stack-up 4L/6L/8L/12L, Components Placement Planning and Execution.
•4th Inter Block and Intra Block Layout Planning and Execution.
Major Schematic Blocks that I have designed in this course are “Ethernet PHY 10/100 Mb/s”, “I2S DAC for Headphone and Speaker”, “MEMS MIC”, “24BIT ADC”, “36W Bi-Directional Brushed DC Motor Divers”, “UART to USB TTL Converter”, “STM32F103 Controller as Debugger and Programmer”, “STM32F407 Main Controller”, “Power Supply and Protections” and many more…. Various Subparts as you can see from the Curriculum.
You will also learn some Basic Blocks as well:
•Pre-Schematic Design Blocks (Block Diagram and Power Budget)
•Layer Stack-up Selection and Rules for Defining any Stack-up
•Different Grounding Techniques( Signal Grounding, Earth Grounding, Chassis Grounding)
•How to Create a RIGID-FLEX PCB and its Stack-up
•How to do Pin-mapping using Cube-MX tool.
•Power Distribution Network Analysis (PDN Analysis) of any PCB.
and many more things.
•Ferrite Bead, ESD Diodes, and Magnetic Application and their selection.
•How to do Placement and Layout Planning on Microsoft-Paint.
and many more….
After the completion of this course you can design any “Mixed Signal with Micro-Controller available across the world”.
Major Controller used in this course are STM32F407XX, STM32F103XX apart from that we used PHY, and Some other sensors and ADC/ DAC as well.

Requirements

• For this course Student should have “Altium Designer” Installed on their PC / Laptop
• Student Should have knowledge of Basic Electronics.You do not need any prior knowledge of “Altium Designer” because we’ll going to do everything from scratch.

You will learn

✓ How to Extract Components information from Requirement Sheet
✓ Selection of Component for Example: Ethernet PHY, Micro-Controller, Motor Driver, Mosfets, ADC, ADC/DAC, MIC etc.
✓ How to Draw a Complex Schematic Block and Its Power Budget Diagrams
✓ What are Differential pairs, USB2.0, I2Cs, UART/USART, CAN, MII/RMII, I2S and many more interfaces
✓ EMI & EMC decisions for a Complex Mixed Signal Schematic Design
✓ How to Create Design Rules Decision for Complex Mixed Signal Board
✓ Layer Stack-Up Design (4L/6L/8L/12L) and Field Solver Simulation
✓ How to Define Board shape and Rigid-Flex PCB Board
✓ Components Placement planning for a Complex Board and its Execution
✓ How to Layout a Complex Board with more than 10,000 interconnects, and Layout Optimization
✓ Power Distribution Network (PDN Analysis) and How to read its Report + Resolve Issues

This course is for

• People who have no experience with Hardware design and want to learn it
• People Who want to Learn Complex Mixed Signal Board Design
• People who want to learn PCB designing
• People who want to Learn How to Select Components out of millions of chip available
• People Who wan to Learn How Create a Board on Altium Designer.
• People who want to enhance their Electronic Hardware Designing Skills.

How much does the Complete Electronics Hardware Design Course 2021 course cost? Is it worth it?

The course costs $11.99. And currently there is a 87% discount on the original price of the course, which was $94.99. So you save $83 if you enroll the course now.

Does the Complete Electronics Hardware Design Course 2021 course have a money back guarantee or refund policy?

YES, Complete Electronics Hardware Design Course 2021 has a 30-day money back guarantee. The 30-day refund policy is designed to allow students to study without risk.

Are there any SCHOLARSHIPS for this course?

Currently we could not find a scholarship for the Complete Electronics Hardware Design Course 2021 course, but there is a $83 discount from the original price ($94.99). So the current price is just $11.99.

Who is the instructor? Is Aviral Mishra a SCAM or a TRUSTED instructor?

Aviral Mishra has created 1 courses that got 67 reviews which are generally positive. Aviral Mishra has taught 478 students and received a 4.5 average review out of 67 reviews. Depending on the information available, Aviral Mishra is a TRUSTED instructor.

More info about the instructor, Aviral Mishra

SOM/COM/DIMM Designer, YouTube Content Creator at EsteemPCB
Aviral is a Electronics Hardware Design Engineer, designed tons of Complex High-Speed Board like SOM/COM/DIMM , He is a Youtube Content Creator on his Youtube Channel EsteemPCB, Aviral is specialising in Low speed Mixed signal and Power Electronics Board for Micro-controller and Micro Processor Based Designs. Through his Youtube Channel EsteemPCB, he has published 100s of Videos on different concepts of PCB design and Hardware designing tools. EsteemPCB have a well known Hardware Designers community on YouTube and on Facebook, You can DM in case of any opportunity.Thanks

9.6

CourseMarks Score®

9.8

Freshness

8.8

Feedback

9.7

Content

Platform: Udemy
Price: $11.99
Video: 22h 56m
Language: English
Next start: On Demand

Students are also interested in

Get this widget on your website (for course creators):

Complete Electronics Hardware Design Course 2021 rating
Copy this code and paste it to your website:
<a href="https://coursemarks.com/course/complete-electronics-hardware-design-course-2021/" target="_blank" title="Complete Electronics Hardware Design Course 2021 on Coursemarks.com"><img border="0" src="https://coursemarks.com/widget/97.svg" width="200px" alt="Complete Electronics Hardware Design Course 2021 rating"/></a>